基于三种干旱指标的朝阳市干旱特征分析

旱灾具有出现频率高、持续时间长、波及范围广等特点，本文运用降水距平百分率、Z指数、SPI标准化降水指数，对朝阳地区50a（1969～2018）干旱特征进行分析。结果表明：Z指数与SPI标准化降水指标得到的朝阳地区干旱特征情况基本一致，能较好地反映出该地区的干旱特征，朝阳地区1969～2018年自然灾害频繁发生，严重干旱年份主要集中在1980、1981、1982 年，与实际相符。     

Comparative study of EICP treatment methods on the mechanical properties of sandy soil

This study analyzed the effect of different treatment methods in enzyme-induced carbonate precipitation (EICP) on the mechanical properties of soil. Soybean crude urease was used to catalyze the precipitation of calcium carbonate (CaCO₃). A multiple-phase method was proposed and further compared with commonly practiced EICP treatment methods (including the one-phase method, two-phase method, and premix-and-compact method) from the aspects of chemical conversion efficiency, CaCO₃ precipitation distribution, permeability, and unconfined compressive strength. Based on the findings, the characteristics of each method were further discussed and summarized. Although the enzymatic CaCO₃ precipitation generated from all the treatment methods could potentiate the soil strength to a great or less degree, using the proposed multiple-phase method could bring about a high chemical conversion efficiency, uniform distribution of CaCO₃ as well as preferable permeability retention. In addition, the multiple-phase method could significantly improve the efficiency of urease usage.     

ZnO·2.7Al2O3 nanocomposite with high optical transparency

Here we report a transparent dual-phase ZnO·2.7Al₂O₃ ceramic. The composite is pore-free and consists of thin nanosheets with a spinel phase and a hexagonal phase, while the two phases match closely in both lattice and refractive index. Such features result in excellent optical transmittance (maximum value >80% in the visible spectrum) at comparable phase volume. This work may provide a new thought for the rational structural design of optical nanocomposites.     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

氮对镀锡钢板的强化作用

通过物理化学相分析研究了3种不同氮含量镀锡板中固溶氮、化合氮的含量,结合相关理论计算了镀锡板中氮的固溶强化和析出强化对强度的贡献。结果表明:随着总氮含量从0.0021%提高到0.0103%,钢中化合氮含量下降10.1%,但是AlN析出相中的氮的含量上升10.7%。氮在提高镀锡板强度方面发挥重要作用,钢中总氮含量提高0.0082%,其对屈服强度的贡献值提升约30 MPa。     

基于GsMAP的尼洋河流域降水时空分布特征研究

鉴于尼洋河地区实测降雨资料缺乏,卫星降雨产品具有显著优势,基于GsMAP降雨产品数据和地面观测站点数据,利用降雨量年内分配特征的δ方法建立卫星降雨校正公式,分析流域降雨量的时空分布特征。结果表明,实测站点月降雨量校正结果较好,相关系数达0.954,年尺度的站点降雨相关系数为0.54,降雨量空间分布呈现出自西向东递增的特点。卫星降雨观测在西部地区存在低估,东部地区有一定程度的高估,在降雨梯度分布上,流域在3500~4000m高程段降雨量呈上升趋势,其他高程段均为显著下降,整体变化率为-104mm/km。流域的年均面平均降雨量为699mm,降雨多集中于夏季,且有逐年增加趋势。     

甘肃省陇东地区极端降水的时空特征

为阐明甘肃省陇东地区极端降水的变化规律,利用该地区13个气象台站1961~2015年的逐日降水资料,应用超门限峰值法、反距离加权法、线性倾向估计法、滑动平均法、Mann-Kendall突变分析法、复值Morlet小波分析法研究极端降水的时空变化特征。结果表明,陇东地区各站第95百分位极端降水阈值在27.8mm附近变化,即可以大雨事件作为极端降水事件进行监测;极端降水指数主要表现为从南向北递减的趋势,极端降水事件对环县和崆峒的影响较小;极端降水事件虽然在总量、强度上表现为减小趋势,但其发生频次及对总降水的贡献率逐渐增强;极端降水总量和极端降水强度周期变化均在21年左右能量最强,而极端降水频次和极端降水贡献率周期变化分别在28、5年左右能量最强。     

Synthesis of ZnS nanoparticles of required size by precipitation in aerosol microdroplets

Zinc sulphide (ZnS) nanoparticles were prepared by an aerosol method from zinc acetate and sodium sulphide (Na₂S) aqueous solutions. Aqueous solution of zinc acetate was dispersed into the form of microdroplets, which were introduced by airflow to vigorously stirred aqueous solution of Na₂S, which was in excess. Microdroplets served as microreactors, so the reaction took place only in limited volume. Particle size distribution was studied by transmission electron microscopy and by dynamic light scattering measurements. In this work, the equation that allows us to predict the final size distribution of ZnS nanoparticles using exact concentration of zinc acetate was derived and ZnS nanoparticles with predicted mean particle diameter around 50 and 70?nm were successfully synthetised.     

混菌矿化增强再生粗骨料的物理力学性能

为克服单一微生物培养成本高且矿化鲁棒性不足的缺陷，提出了一种混菌矿化增强再生粗骨料物理力学性能的方法.通过筛选矿化效率较高的好氧嗜碱混菌，考察了混菌矿化对再生粗骨料物理力学性能和混凝土抗压强度的影响.结果表明：相同增强时间下，混菌比纯菌呈现出更优异的矿化增强效果；随着混菌矿化增强时间的延长，再生粗骨料吸水率和压碎指标呈现出先减小后增大的趋势，最优增强时间为15 d；采用矿化增强再生粗骨料制备的再生混凝土抗压强度提高幅度达到22.1%.